Otros 150C25NBD rockwell automation smc-3 arrancador suave electrónico 25 amps voltaje de control 100 240 vac - 150-c25nbd
Antes $24,537.00
Disponible 0 Pzas
Español
Nuestros arrancadores suaves SMC ™ -3 están disponibles con un rango actual de 3 ... 480 A. Cuentan con un control compacto y verdadero de tres fases en un paquete económico. Incluyen protección contra sobrecargas bypass integral y diagnósticos del motor y del sistema.
Proporciona un rango de 3… 480 A
Utiliza voltaje nominal: 200… 690 VCA 50/60 Hz
Incluye cinco modos de inicio y parada.
Proporciona protección de sobrecarga electrónica incorporada del motor
Incluye el botón de espera para probar / presionar para restablecer
Ofrece una configuración fácil y segura usando interruptores DIP
Proporciona un contactor de derivación / funcionamiento con rectificador controlado por silicona (SCR) incorporado
Ingles
SMC-3, 3-Wire, Open Type, 25A, 480V, 3-Phase, 50/60Hz Max, Control Voltage 100...240V AC
Product Details
| CONTROLLER DATA | |
|---|---|
| Line Voltage | 480V 60Hz |
| Starting Duty | 350% |
| Current Rating | 25A |
| Enclosure Type | Open |
| Control Voltage | 100...240V AC |
| Fault Contact | Normally Opened (NO) |
Supporting Documentation and Downloads
- SMC-3 Photo
- Dimension Sheet (Catalog)
- Specifications Sheet
- Features and Modes of Operation
- Wiring
- OL Trip Curves and Starts per Hour Curves
- Short Circuit Ratings Data Sheet
- Dimension Sheet (PDF)
- Product Drawings
The Allen-Bradley product with part number 150-C201NBD is an SMC Smart Motor Controller or may be referred also as Soft Starter. As the name implies, Soft starters are especially considered for protecting motors from start-up stress and damages. Additionally, motor starts are energy saving devices and typically installed for the said functionality.
To protect the connected motor, this soft starter is capable of running the Soft Start, Current Limit Start, Selectable Kickstart, Coast-to-rest and Soft Stop.
At soft start, which is one of the most common methods of starting a motor, initial torque is within the range of 0 to 70% of locked rotor torque. The voltage of the motor is increased without a step reference within the defined acceleration time. The acceleration is an adjustable parameter.
Current limit functionality clamps the incoming current at a certain level to limit the maximum starting current to the motor. Current adjustment may be adjusted from 25 to 55% the Full Load Current.
Selectable kickstart is somewhat similar to Soft start except that when the motor has reached the up to speed condition, the voltage output transfers to full voltage.
Soft stop is similar to coast to stop however, soft stop is an extended version of coast to stop. Using this function, load stop when the voltage drops up to a point where load torque exceeds the motor torque.
This drive is also equipped with an auxiliary contacts with max voltage of 120VAC or 240VAC. To utilize this contact outputs, use a stranded copper wire.
Technical Specifications for 150-C25NBD
| Brand | Allen-Bradley |
| Product Line | SMC-3 |
| Part Number/Catalog No. | 150-C25NBD |
| Current Rating | 25 A |
| Rated Voltage | 200-460V AC |
| Input Line | 200-460V AC, 3-Phase, 50/60 HZ |
| Wiring | 3-Wire |
| Control Voltage | 120 / 240 VAC |
| Compatibility | Delta Compatibility |
| Enclosure Type | Open |
| Marca | Otros |
|---|---|
| MPN: | 150C25NBD |
The information below is required for social login
Iniciar Sesión
Crear una nueva cuenta